Out of Order/Out of Service Signs
Select Your Product Design
Out of Order Signs signal that equipment or areas should not be used. Whether temporary or long-term, they prevent confusion and reduce the risk of misuse. Clear communication helps keep operations safe and organized.
Quality and Durability at Any Thickness...
About the thickness of a dime
Best for indoor or temporary outdoor use, wall or fence mounted signage, smaller-sized signs (under 12 inches)
About the thickness of a quarter
Best for small and mid-sized outdoor signage. Think signs on poles and posts.
About the thickness of two dimes
Best for long term, high-wind applications, municipal and DOT compliant areas.
About the thickness of two dimes
Best for long term, high-wind applications, municipal and DOT compliant areas.
Visibility That Works Day and Night
Engineer Grade
A standard reflective film designed for basic nighttime visibility. Best suited for areas with slower traffic or close viewing distances. Meets ASTM D4956 Type I requirements, making it a reliable choice for general-purpose signage.
|
High Intensity Prismatic
A mid-level reflective option that offers stronger brightness and longer visibility range than Engineer Grade. Built with prismatic technology and compliant with ASTM D4956 Type IV, it’s commonly used for traffic and roadway signage.
|
Diamond Grade DG³
Diamond Grade DG³ reflective sheeting meets ASTM D4956 Type XI. This highly reflective sheeting uses 100% efficient full-cube prismatic technology that reflects, almost twice the amount of light back to its source as High Intensity Prismatic sheeting.
|
|
|---|---|---|---|
| Luminance | Lower brightness for basic visibility | Moderate brightness for improved visibility | Highest brightness for maximum visibility |
| Sign Position | Best when viewed head-on | Maintains visibility at slight angles | Performs well even at wide or sharp angles |
| Distance | Performs well at short to mid-range distances | Designed for long-distance visibility | |
| Standards |
on 3M’s website: (link will open in a new window)
3M™ Protective Laminate
Provides a durable barrier against UV fading, dirt, stains, and most graffiti. Keep your signs looking clean and well-maintained by making them easier to clean and resistant to damage. Only our 3M™ Diamond Grade Prismatic reflective product offers a 3M overlaminate option. All other products have the option to use an anti-graffiti liquid laminate coating that offers similar benefits without the physical adhesive laminate.
- Conformable to handle complex shapes and curves including rivets and corrugations
- Non-PVC solution
We print your design on the finest aluminum materials using world-class large-format commercial printers. We use an eco-friendly, four-color print method with weather-, fade-, and abrasion-resistant UV ink that results in vibrant, hard-to-miss signs.
Our custom printed aluminum signs are made up of two .008” aluminum sheets sandwiching a solid polyethylene core. These 2 mm (13.5 gauge) aluminum signs are extremely durable and are fit for both indoor and outdoor use.
We know that time is money so we will not leave you waiting. Production of your aluminum sign starts right after you place your order, and your sign is produced and shipped the ?next business day.
We also offer free ground shipping on aluminum sign orders over $99.
Help with Recent Order
Frequently Asked Questions